Arcotherm GE 35
Key | Part No. | Description | Dates | Notes |
---|---|---|---|---|
1 | P20134 | Handle | ||
2 | P20132 | Foot | ||
4 | C30305 | Plug | ||
5 | G01432 | Axle | ||
6 | C10509 | Wheel | ⌀ 200 mm, ⌀ 20 mm | |
7 | M20203 | Wheel holder | ⌀ 20 mm | |
8 | G01427 | Fuel tank | ||
9 | I31014 | Drain plug | ||
10 | I31025 | Drain plug OR | ||
11 | I31018 | Tank plug | ||
12 | P30103 | Inlet grille | ||
13 | T10207 | Fan | ⌀ 300 mm, 18° | |
14 | M10609 | Grub screw | M8 × 8 | |
15 | G01461-V1 | Motor flange | ||
17 | G01036 | Combustion chamber | rif. 17+18 | |
18 | G01039 | Flame guard shield | ||
19 | G01463-V1 | Outlet cone | ||
20 | G01495-V1 | Base | ||
21 | G01502-V1 | Lower body | ||
22 | G01508-V1 | Upper body | ||
25 | C30307 | Protection cable | ⌀ 35 mm | |
83 | M10108 | Screw | M5 × 16 mm | |
84 | M10229 | Screw | Hex-head, M6 × 55 mm | |
85 | M10704 | Nut | M6 | |
86 | M20408 | Nut | M5 | |
88 | M10204 | Screw | Hex-head, M6 × 16 mm | |
93 | M10509 | Screw | Hex-head, self-tapping, 14 × ½″ |
Key | Part No. | Description | Dates | Notes |
---|---|---|---|---|
26 | G01005 | Control box support | ||
27 | E40107 | LOA21/24 base | ||
28 | E40106 | Control box | Landis & Gyr LOA21-24 | |
29 | E10917 | Transformer | H.T. 818 C, 230 V | |
30 | G02044 | H.T. cable | ||
31 | E11120 | Relay Finder | 65.31 V 230 | |
32 | E20305 | Terminal board | ||
33 | G01518 | Electrical components drawer | ||
34 | E11021 | Pilot lamp | 230 V, 50 Hz | |
35 | E20402 | Switch | plastic profile | |
36 | E10110 | Switch | 0–1 | |
37 | E20626 | Thermostat plug | ||
38 | E20627 | Plate plug | ||
39 | E20307 | Cable fastener | ||
40 | E10307 | Fuse | 6 mm × 30 mm, 6 A | |
41 | E30401 | Cable | with plug | |
42 | E30407 | Cable | with plug and cable fastener | |
87 | M10508 | Screw | Self-tapping, 8 × ⅜″ | |
89 | M10507 | Screw | Self-tapping, 8 × 1½″ | |
90 | M10514 | Screw | Self-tapping, 4 × ½″ | |
91 | M20409 | Nut | M6 | |
92 | M10115 | Screw | M6 × 20 mm | |
100 | M10501 | Screw | Self-tapping, 4 × ⅜″ |
Key | Part No. | Description | Dates | Notes |
---|---|---|---|---|
43 | I40303 | Rilsan pipe | ⌀ 6 mm | |
44 | C30301 | Protection cable | ⌀ 18 mm | |
45 | G01029 | Pipe connection | ¼″ M × 6 | |
47 | I20401 | Connection | Straight, ¼″ M × 6 | |
48 | I20402 | Connection | Straight, ⅛″ M × 6 | |
49 | I31017 | Nut | ⅜″ × 5 | |
50 | K01010-V1 | Filter support | ||
51 | I31013 | Double screw | ||
52 | I20405 | Connection | 90°, ⅜″ M × 6 | |
53 | T20211 | Filter | with cartidge, ⅜″ | |
54 | T20202 | Filter OR | ||
55 | T20214 | Top oil filter seal | ||
56 | T20206 | Filter cartridge | ||
57 | T20212 | Filter housing | ||
101 | T20213 | Lower oil filter seal | ||
106 | T20234 | OR KIT filter | pos. 54-55-101 |
Key | Part No. | Description | Dates | Notes |
---|---|---|---|---|
30 | G02044 | H.T. cable | ||
43 | I40303 | Rilsan pipe | ⌀ 6 mm | |
58 | E50101 | Fan Thermostat | ||
59 | E50102 | Limit Thermostat | ||
60 | E10215 | Electrode | ||
62 | G01512 | Oil supply pipe | ⌀ 4 mm | |
63 | T20410 | Pump | Danfoss BFP 11-R3 | |
64 | T20114 | Solenoid spool | BFP11/21 | |
65 | T20117 | Solenoid valve | Danfoss | |
66 | I20401 | Connection | Straight, ¼″ M × 6 | |
67 | E10513 | Coupling K1 | ||
68 | I30856 | Connection | 90°, ⅛″ M × 4 | |
69 | I30858 | Bicone | ⌀ 4 mm | |
70 | I30857 | Nut for bicone | ⌀ 4 mm | |
71 | E10511 | Motor | 130 W, with condenser | |
72 | E11201 | Condenser | 5 μF | |
73 | I30859 | Connection | Straight, ⅛″ M × 6 | |
74 | I31034 | Nut | M14 | |
75 | G01176 | Burner flange | ⌀ 80 mm | |
76 | I30638 | Nozzle support | ||
77 | G01077 | Turbo disc | ||
78 | T20302 | Nozzle | 0.75 gph, 80° | |
80 | E50306 | Ld ph. unit | LOA21/24 | |
81 | E50307 | Fixing clamp | ||
82 | E50308 | Flange | ||
87 | M10508 | Screw | Self-tapping, 8 × ⅜″ | |
94 | M10703 | Nut | M5 | |
96 | M10504 | Screw | Self-tapping, 6 × ½″ | |
97 | M10102 | Screw | M4 × 8 mm | |
104 | M10517 | Screw | Hex-head, self-tapping, 10 × ⅝″ |